Using SSH to Access Math Department Resources
The University of Wisconsin-Madison Department of Mathematics maintains a login server for SSH connections from outside the department. It is named login.math.wisc.edu (referred to as login.x below for brevity).
To connect from a university network or from outside the university with a VPN:
- Server name: login.math.wisc.edu
- Port: 22
- Authentication method: password or SSH key
- To connect this way, you must have an IP address that corresponds to a wisc.edu host address. You can use the campus wireless| UWNet, | Eduroam, or | WiscVPN.
- Example SSH command to connect:
Connecting to other servers
To access Math Department resources via SSH, you must first use an SSH client to connect to login.x. You can then SSH to the system of your choice within the department.
For example, suppose you wished to run a sage program on one of the research servers. For simplicity sake, the research servers have aliases (nicknames) magma0, magma1, ..., magma19, with the more powerful machines having the lowest numbers.
To start your sage program, you might use an SSH client on your laptop to connect to login.math then run SSH again on login.x to connect to magma0. Please do not run research programs on login.x! While this machine may have all the tools necessary to test programs, it is not powerful enough to handle more than the most trivial of tasks. If you run a program that uses a lot of resources on login.x, you may prevent users (including yourself) from accessing these machines or significantly reduce it's responsiveness.
Generating and using an SSH Key
Using SSH public key authentication to connect to a remote system is a robust, more secure alternative to logging in with an account password or passphrase. SSH public key authentication relies on asymmetric cryptographic algorithms that generate a pair of separate keys (a key pair), one "private" and the other "public". You keep the private key a secret and store it on the computer you use to connect to the remote system. Conceivably, you can share the public key with anyone without compromising the private key; you store it on the remote system in a .ssh/authorized_keys directory.
The IT staff recommends that you generate an SSH key to use when moving from one machine to another within the department network. Using an SSH key is both easier and more secure than retyping your password when you are moving from one Math Department machine to another.
To set up an SSH key on the Linux Workstations, do the following:
- Log onto any Linux workstation or research server in the department. You can use SSH as explained above to connect to login.x for this purpose.
- If you are logged in to a desktop GUI, open a terminal window.
- At the prompt, type
ssh-keygen. Accept the default values. You need not enter a passphrase, but it is more secure if you do. You can just press enter at the prompt to not use a passphrase.
- Add the key you just generated to your authorized_keys file. Type,
cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
- To test, type,
ssh magma0. You should be connected to magma0 without having to retype your password unless you chose to use a passphrase. Then you would be prompted for that password instead of your user account password.
On other computers how this is done depends on the SSH software in use. On Windows, Mac, and Linux OpenSSH is the most common option and will be described here.
- Open a terminal
ssh-keygen. Accept the default values for all prompts.
- A public key has been generated. Locate it. On all platforms OpenSSH places keys in the
.sshfolder in your home directory.
- View the public key, it is a text file:
- Linux/Mac from a terminal:
- Windows from Powershell: notepad
- Linux/Mac from a terminal:
- Copy the text from the public key file to the clipboard.
- SSH to login.x.
cat >> ~/.ssh/authorized_keys
- Paste the public key from the clipboard into the terminal.
- Test SSH'ing from your computer to login.x again to verify that it worked.
Note: The login server login.math requires the use of SSH keys to connect from outside university networks. You can use this same SSH key for that purpose. Instructions for doing so are different for each ssh client and are therefore beyond the scope of this document. Consult your client's documentation (or do an internet search) or ask a member of the IT staff for assistance.
WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!
When connecting to a server you see this message
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! Someone could be eavesdropping on you right now (man-in-the-middle attack)! It is also possible that a host key has just been changed. The fingerprint for the ECDSA key sent by the remote host is SHA256:1U70vTc+CTgtUhqWKJ5tIs03SDJOsLtBRp3OQxgCoWQ.
If you had connected to the server recently without problem please contact IT ASAP and we'll take a look. If it has been a long time(6+ months) since you last connected it is possible that the server's "SSH fingerprint" has changed. In this case you can either contact IT(preferred) or run this command:
ssh-keygen -R NAME_OF_SERVER_YOU_WERE_CONNECTING_TO
Then try connecting again. It will ask you about the "authenticity of host". Just enter "yes". You should now be connected.
If the problem happens again soon after it was fixed once please contact IT ASAP as this can indicate a possible security issue.
Connecting: Advanced Topics
These topics assume you are using an OpenSSH client(Linux, Mac OS, or )
Your SSH settings folder is the .ssh folder in your home directory.
Using login.x as a Jump Host
One can configure the OpenSSH client to automatically use login.x as a "jump host" to connect to other servers. Once you have SSH keys configured you can connect to any research server with a single command. For example, to connect to magma2 using login.x as a jump host:
$ ssh -J login magma2 you@edmonton:~$
First generate an SSH key pair as decribed in "Generating an SSH Key" above.
Next, edit the config file in your .ssh folder on your workstation/laptop and add the following, replacing YOUR_USER_NAME with your account name on the servers:
Host login HostName login.math.wisc.edu User YOUR_USER_NAME Port 8022 ForwardAgent yes Host magma2 HostName magma.math.wisc.edu User YOUR_USER_NAME
You can add more "Host" entries for other servers that you use.
Then test as shown above.